|
| TM 11-5820-401-34-3/0967-LP-432-3060
SILICON VERSION IF DISCRIMINATOR A4200A ALINEMENT.
4-19.
PURPOSE. This procedure enables the integrated circuit discriminator to provide maximum separa-
tion of the audio signal from the rf carrier. Coil L4202 is adjusted to tune the fm detector portion of the
integrated circuit exactly to the 11.5-MHz center frequency.
TEST EQUIPMENT AND MATERIALS
Maintenance Kit MK-1978/VRC
Test Set AN/GRM-114A
Power Supply PP-1104(*)/G
TEST SETUP. Connect the equipment as shown in test setup diagram
. Remove R-442/VRC
bottom cover. (See paragraph 2-7.)
INITIAL EQUIPMENT CONTROL SETTINGS. Set equipment controls as indicated in the following
table. Inject 20-v rf at 30 MHz, 1-kHz modulation: 8-kHz deviation.
CONTROL AND SWITCH SETTINGS
CONTROL OR SWITCH
POSITION/SETTING
EQUIPMENT
I
See test setup diagram
AN/GRM114A;
MM-100E
4-123
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |