|
| TM 11-5820-401-34-3/0967-LP-432-3060
2-11.
A1600 ASSEMBLY REPLACEMENT.
MATERIALS/PARTS: Power Supply Assembly A1600
PRELIMINARY PROCEDURE: Remove bottom cover. (See paragraph 2-7.)
REMOVAL
NOTE
The A1600 assembly is located on top of the A1000 assembly.
1. Disconnect three color-coded wire plugs (1).
2. Unfasten retaining clip (2) by moving clip to right.
3. Lift front of assembly (3) and pull forward to remove from bracket (4).
INSTALLATION
1. Place assembly (3) in bracket (4) and push into place.
2. Push front of assembly (3) down and secure by moving retaining clip (2) to left.
3. Connect three color-coded wire plugs (1).
FOLLOW-ON MAINTENANCE: Replace bottom cover. (See paragraph 2-7.)
2-22.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |