|
| Figure 78 - Continued.
(4) Remove four panhead screws (13),
(2) Install two support bearing assem-
blies (3 and 14) on header-shield
four hexagonal nuts (4) and eight
assembly (7) and secure with four
washers (12), securing board as-
panhead screws (2 and 15).
semblies (6 and 11) to h e a de r-
shield assembly (7) and remove the
(3) Posit ion coupler assembly (1)
through support bearing assem-
two board assemblies.
blies (3 and 14). Secure it with re-
b. Assembly.
(1) Install board assemblies (6 and 11)
tainer ring (16).
on header-shield assembly (7) and
(4) Install cover (8) on header-shield
secure them with four panhead
assembly (7) and secure it with two
screws (13), eight lockwashers (5
panhead screws (10), and lock-
and 12), and four hexagonal nuts
washers (9).
(4) .
149
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |