|
| TM 11-2300-364-15-1
(2) When the installation is complete, check
b. The following additional information is
the tightness of all bolts and screws.
provided:
(3) Read the technical manuals supplied with
(1) To drill the correct size holes for the sheet
the equipment before operating the communication
metal screws, select a drill bit that is slightly smaller in
system.
diameter than the screw.
Figure 2-1. Cable Assembly, Special Purpose, Electrical CX-4722/VRC
connector disassembly.
6
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |