TB 9-2320-387-35-8
4-12. Locate, mark and drill one 0.125-in. diameter pilot hole (29) in air intake stack support bracket (28).
4-13. Using support bracket (30) as template, drill 0.125-in. diameter pilot hole (29) in air intake stack
support bracket (28).
4-14. Enlarge drilled holes (29) in air intake stack support bracket (28) to 0.297-in. diameter.
4-15. Install two inserts (27) in air intake stack support bracket (28).
4-16. Install antenna (26) on support bracket (30) with lockwasher (32) and screw (33).
4-17. Install support bracket (30) and antenna (26) on air intake stack support bracket (28) with two
screws (31) and lockwashers (32).
26
27
32
28
33
32
31
0.63
30
2.25
29
26.
ANTENNA 013-1981 010 QTY. 1
27.
INSERT 12446871-3 QTY. 2
30.
SUPPORT 12506676 QTY. 1
31.
SCREW MS35206-267 QTY. 2
32.
LOCKWASHER MS35338-43 QTY. 3
33.
SCREW MS35207-261 QTY. 1
Figure 5-34.
5-31