|
| TB 9-2320-387-35-5
22-17. Secure EPLRS antenna cable (26) to taillight wiring harness (31) with tie-down straps (32).
26
31
32
32. TIE-DOWN STRAP MS3367-1-0 QTY. A/R
Figure 5-77
22-18. Route SINCGARS antenna cable (43) from hole (40) along existing taillight wiring harness (31) and
EPLRS antenna cable (26) and secure with four existing loop clamps (39) and existing self-tapping
screws (41).
22-19. Route SINCGARS antenna cable (43) along existing taillight wiring harness on left-side frame rail
with existing loop clamp (38), and existing self-tapping screw (41).
22-20. Route SINCGARS antenna cable (43) along existing taillight wiring harness and secure with
existing loop clamp (38) and self-tapping screw (41).
22-21. Route SINCGARS antenna cable (43) along existing taillight wiring harness and secure with
existing loop clamp (42), self-tapping screw (36) and lockwasher (37).
22-22. Route SINCGARS antenna cable (43) along existing taillight wiring harness and secure with
existing loop clamp (46), screw (48), lockwasher (47), washer (45), and nut (44).
22-23. Route SINCGARS antenna cable (43) to antenna base (50) with existing loop clamp (33), screw (49),
lockwasher (34), and nut (35).
22-24. Attach SINCGARS antenna cable (43) to antenna base (51).
22-25. Route SINCGARS antenna cable (43) through hole (52) in rear wall (53).
22-26. Coil excess antenna cable (43) and secure to inside of taillight closeout cover with tiedown strap (32).
5-56
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |