Install locking collar - TB-9-2320-387-35-50038

TB 9-2320-387-35-5

NOTE

Ensure convoluted tubing is cut straight and even to allow proper

fit of locking collar.

9-2. Install locking collar (3) on one end of convoluted tubing (4).

9-3. Place convoluted tubing and grommet assembly (4) in existing hole (5) of right wheelhouse (2),

through wheelhouse (2), and through hole (6) in right wheelhouse (2). Mark convoluted tubing (4) at

proper length.

9-4. Remove convoluted tubing (4) from wheelhouse (2) and cut to proper length.

NOTE

Ensure convoluted tubing is cut straight and even to allow proper

fit of locking collar.

9-5. Install locking collar (3) on other end of convoluted tubing (4).

9-6. Place convoluted tubing and grommet assembly (4) in hole (6) on inside of right wheelhouse (2),

through wheelhouse (2), and through hole (5) in rear wall (2). Secure convoluted tubing (4) to right

rear wheelhouse (2) with nylon nuts (7).

3. LOCKING COLLAR Z52-0013-002 QTY. 2

4. CONVOLUTED TUBING Z52-0013-001 QTY. 1

Figure 5-22.

Figure 5-23.

7. NYLON NUT 10075-1397 QTY. 1

Figure 5-24.

Figure 5-25.

5-16