Install control cable seal assembly rubber grommet

TB 9-2320-280-35-6

25-26. Install control cable seal assembly rubber grommet (40) on DVE/PTM cables (6), (8), and (9). Secure

control cable seal assembly rubber grommet (40) on tunnel rivet nuts (4) with

two capscrews (38) and washers (39).

25-27. Cover DVE/PTM cables (6), (8), and (9) that run along vehicle exhaust pipe (10) with heat

shield sleeve (41). Secure heat shield sleeve (41) and DVE/PTM control cables (8) and (9) with cable

ties (42).

25-28. Route DCM/PTM interconnect cable (6) behind radio rack to DCM mounting assembly (43).

38.

CAPSCREW B1821BH025C075N QTY. 2

39.

WASHER MS27183-10 QTY. 2

41.

HEAT SHIELD SLEEVE QTY. 1

42.

STAINLESS STEEL CABLE TIE 69855K72 QTY. A/R

Figure 5-81.

Figure 5-82.

5-64