 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|  TB 9-2320-280-35-2
NOTE
Perform step 19-15 for vehicles with left rear cab enclosure panel
only.
19-15. Cut 2 x 2 in. section (43) from left rear cab enclosure panel (41). Install grommet (42). Reinstall cab
enclosure panel (41). (Refer to TM 9-2320-280-20.)
19-16. Locate, mark, and drill five 0.147-in. holes (35) along tunnel edge (39) and rear of left B-beam (36).
19-17. Route INC-EPUU cable (24), URO extension cable (30) and power cable (27) rearward under
B-beam (36) and along tunnel edge (39).
19-18. Route antenna cable (9) along rear of left B-beam (36) and secure with two loop clamps (40) and
self-tapping screws (37).
rearward along tunnel edge (39) and secure with three clamps (38) and self-tapping screws (37).
27
24
30
2.00
36
35
42
5.50
41
37
2.00
38
35
0
2.0
40 37
9
37
37
43
40
B-PILLAR
38
0
11.0
35
37
38
0
11.0
35
37.
SELF-TAPPING SCREW 9421073 QTY. 5
38.
LOOP CLAMP MS21333-77 QTY. 3
8.00
40.
LOOP CLAMP MS21333-72 QTY. 2
39
42.
GROMMET MS21266-1N QTY. A/R
Figure 5-66.
5-50
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals