Secure 24V terminal board power wire terminal lug

TB 9-2320-280-35-2

6-16. Secure three 24V fusewire assemblies (24) and one 12V fusewire assembly (3) to B-beam (21) with

four self-tapping screws (35).

NOTE

For models equipped with power stud, perform step 6-17.

Otherwise, proceed to step 6-18.

6-17. Secure 24V terminal board power wire terminal lug (27) to power stud (39) with lockwasher (37)

and existing nut (38).

6-18. Secure 24V terminal board power wire terminal lug (27) to terminal board (36) with lockwasher (37)

and existing nut (38).

6-19. Install decal (34) on B-beam (21).

6-20. If previously removed, install right-hand rear fixed door. (Refer to TM 9-2320-280-20.)

6-21. Install batteries. (Refer to TM 9-2320-280-20.)

34. DECAL 12339060 QTY. 1

35. SELF-TAPPING SCREW 12342499-2 QTY. 4

37. LOCKWASHER MS35338-48 QTY. 1

Figure 5-15.

5-11