Route speaker cables - TB-9-2320-280-35-130118

TB 9-2320-280-35-13

NOTE

Route SINCGARS antenna cable down B-beam with two man

configuration only.

29-2. Route speaker cables (3) and (6) and SINCGARS antenna cable (19) down B-pillar (5) and secure

with three existing loop clamps (18) and capscrews (17).

29-3. Route speaker power cable (3) to terminal board and secure with footman loop (8), loop clamp (9),

and existing capscrew (7).

29-4. Route speaker R/T cable (6) and SINCGARS antenna cable (19) from overhead mount (20) along

cab enclosure panel (12) and secure with three existing loop clamps (10) and capscrews (11).

29-5. Route speaker R/T cable (6) through tunnel (15) to HF 20 watt radio mount. Secure cable to

tunnel (15) with loop clamps (13) and capscrews (14).

29-6. Route SINCGARS antenna cable (19) through cab enclosure panel (12) under tunnel insulation,

through integrated rack (16), to vicinity of SINCGARS mount.

17 18

11 10

FOUR-MAN VEHICLE

Figure 5-107.

5-90