|
| TB 9-2320-280-35-13
6-16. Secure three 24V fusewire assemblies (24) and one 12V fusewire assembly (3) to B-beam (21) with
four self-tapping screws (35).
NOTE
For models equipped with power stud, perform step 6-17.
Otherwise, proceed to step 6-18.
6-17. Secure 24V terminal board power wire terminal lug (27) to power stud (39) with lockwasher (37)
and existing nut (38).
6-18. Secure 24V terminal board power wire terminal lug (27) to terminal board (36) with lockwasher (37)
and existing nut (38).
6-19. Install decal (34) on B-beam (21).
6-20. If previously removed, install right-hand rear fixed door. (Refer to TM 9-2320-280-20.)
6-21. Install batteries. (Refer to TM 9-2320-280-20.)
21
24
~
34
3
35
27
36
27
39
37
38
38
37
34. DECAL 12339060 QTY. 1
35. SELF-TAPPING SCREW 12342499-2 QTY. 4
37. LOCKWASHER MS35338-48 QTY. 1
Figure 5-15.
5-11
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |