|
| TB 9-2320-280-35-1
27-26. Install control cable seal assembly rubber grommet (40) on PTM control cables (8) and (9) and
DCM/PTM interconnect cable (6). Secure control cable seal assembly rubber grommet (40) on tunnel
rivet nuts (4) with two capscrews (38) and washers (39).
27-27. Cover DVE/PTM control cables (8) and (9) that run along vehicle exhaust pipe (10) with heat shield
sleeve (41). Secure heat shield sleeve (41) and PTM control cables (8) and (9) with cable
ties (42).
27-28. Route DCM/PTM interconnect cable (6) behind radio rack to DCM mounting assembly (43).
38
39
9
8
6
40
4
6
41
42
43
~
10
38.
CAPSCREW B1821BH025C075N QTY. 2
39.
WASHER MS27183-10 QTY. 2
41.
HEAT SHIELD SLEEVE N/A QTY. 1
42.
STAINLESS STEEL CABLE TIE 69855K72 QTY. A/R
Figure 5-98.
Figure 5-99.
5-78
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |