Attach connector - TB-9-2320-280-35-10072

TB 9-2320-280-35-1

17-13. Attach connector (23) to plate (22) with four screws (24) and nuts (21).

17-14. Connect antenna cable (2) to back of connector (23).

NOTE

Ensure large key is at bottom of connector.

17-15. Using plate (22) as template, locate, mark, and drill four 0.147-in. diameter holes (27) in engine

compartment wall (13).

17-16. Attach plate (22) to engine compartment wall (13) with four self-tapping screws (26).

17-17. Connect antenna cable (25) to connector (23).

21.

NUT 116002 QTY. 4

23.

CONNECTOR MS3119E14-19 QTY. 1

24.

SCREW 9417875 QTY. 4

25.

ANTENNA CABLE 506B339-01 QTY. 1

26.

SELF-TAPPING SCREW 9416639 QTY. 4

Figure 5-56.

5-46