|
| TB 9-2320-280-35-1
NOTE
Perform steps 13-18 through 13-23 for AN/VRC-92F only.
13-18. Locate, mark, and drill two 0.147-in. evenly spaced holes (29) on top of front dash (30).
13-19. Locate, mark, and drill two 0.147-in. holes (32) in support (31).
13-20. Route antenna cable (9) from windshield center frame (28) along top of front dash (30), down along
front dash support (31), and secure with four self-tapping screws (25) and loop clamps (26).
25
9
25
28
26
26
29
30
31
2.00
32
26
25
32
2.00
26
25
25. SELF-TAPPING SCREW 9421073 QTY. 4
26. LOOP CLAMP MS21333-65 QTY. 4
Figure 5-38.
5-31
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |