|
| TB 9-2320-280-35-1
11-24. Route two antenna cables (22) and (23) along front wheel well seam (35) and along front (33),
intermediate (32), and rear (31) cargo bed supports. Secure with two self-tapping screws (26), loop
clamps (27), screw (36), clamp (27), nut (34), and existing self-tapping screw (37) and clamp (30).
11-25. Route antenna cable (22) along taillight wiring harness with two existing loop clamps (28) and (45),
self-tapping screws (37), and lockwashers (44).
11-26. Route antenna cable (22) to antenna base (29) with existing loop clamp (40), nut (42),
lockwasher (41), washer (39), and screw (38).
11-27. Install antenna cable (22) on antenna base (29).
11-28. Coil excess antenna cable (22) and secure to inside of taillight closeout cover with tiedown
strap (43).
34
33
27
35
32
31 27
27
30
23 29
28
36
22
26
44
37
45
43
44
41
42
40 39
37
38
37
26.
SELF-TAPPING SCREW 9421073 QTY. 2
27.
LOOP CLAMP MS21333-69 QTY. 3
34.
NUT MS35650-302 QTY. 1
36.
SCREW MS35224-65 QTY. 1
43.
TIEDOWN STRAP MS3367-1-0 QTY. A/R
Figure 5-28.
5-23
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |