ORSMC (Off-Route Smart Mine Clearance System)

ORSMC (Off-Route Smart Mine Clearance System)

SYSTEM PARAMETERS

SYSTEM DESCRIPTION

The ORSMC is a remotely-piloted, Highly Mobile Multi-Purpose

Frequency: 928 MHz (telemetry radio)

Wheeled Vehicle (HMMWV) that incorporates decoy technologies that

800 935 MHz (video transmitter)

cause smart mine sensors to misfire the munition or fire on a dummy

target. It consists of a telemetry radio that utilizes a vertical whip antenna

Power: 11 W (video transmitter)

and a video transmitter that utilizes a vertical dipole antenna.

150 mW (telemetry radio)

HAZARD CONTROLS (to reduce or eliminate risk)

SYSTEM HAZARDS

Power Density Levels (PDL) ....

This system is not able to produce potentially hazardous PDLs in excess of the safety

standard and is not subject to radiation protection control.

RF shock/burn ....................

Observe standard RF shock precautions. Do not touch the either antenna when energized.

Other................................

Consult the equipment Technical Manual for other operator and/or maintenance hazards.

PATHFINDER Radar System

SYSTEM DESCRIPTION

SYSTEM PARAMETERS

The PATHFINDER is a marine surveillance radar that utilizes an end-fed,

Frequency: 9.375 GHz

Power: 10 W

slotted, linear array antenna.

HAZARD CONTROLS (to reduce or eliminate risk)

SYSTEM HAZARDS

Power Density Levels (PDL) ....

In the nonscanning mode, this system is able to produce potentially hazardous PDLs in

excess of the safety standard. Establish a Nonionizing Radiation Protection Program

(IAW guidelines provided in this TB) .

Hazard distance from antenna ....

In the nonscanning mode, exclude personnel to a distance of 2.5 m from the main beam

of the antenna.

Open/cracked waveguides.........

All open or broken waveguides produce potentially hazardous PDLs in close proximity

of the break (12 cm). Exclude personnel from this area and do no permit operation of

this system with any cracked, broken or open waveguide.

Other.................................

Consult the equipment Technical Manual for other operator and/or maintenance hazards.

Equipment - 206