|
| AN/TSQ-71A, B Landing Control Central
SYSTEM DESCRIPTION
SYSTEM PARAMETERS
The AN/TSQ-71 is used to direct aircraft in a tactical
Frequency: 9 9.6 GHz (AN/TPN-18)
environment and to provide ground control approach (GCA)
116 150 MHz (AN/ARC-73A)
capabilities. This system consists of one AN/TPN-18 radar set
225 400 MHz (AN/ARC-51BX)
(azimuth/elevation dish antennas), two AN/VRC-46 radio sets
30 76 MHz (AN/VRC-46)
(whip-type antenna), three AN/ARC-73A transceivers
(omnidirectional blade/whip antenna) and three AN/ARC-51BX
Power: 192 W average; 200 kW PEP (AN/TPN-18)
transceivers (omnidirectional blade/whip antenna).
25 W (AN/ARC-73A)
25 W (AN/ARC-51BX)
5 W Average, 35 W PEP (AN/VRC-46)
HAZARD CONTROLS (to reduce or eliminate risk)
SYSTEM HAZARDS
Power Density Levels (PDL) ....
This system is able to produce potentially hazardous PDLs in excess of the safety
standard. Establish a Nonionizing Radiation Protection Program (IAW guidelines
provided in this TB) .
Hazard distance from antenna ..
For the AN/VRC-46 radio set, exclude personnel to distances of 1.0 m from the
antenna. For the AN/ARC-73 radio set, exclude personnel to distances that are greater
than 1.0 m from the antenna. For the AN/TPN-18, in the nonscanning mode, exclude
personnel to a distance of 25 m from the azimuth antenna and 11 m from the elevation
antenna. Do not operate the main beam of the AN/TPN18 in potentially occupied
areas.
Open/cracked waveguides.......
For the AN/TPN-18, all open waveguides and feed horn outputs produce potentially
hazardous PDLs within close proximity. Exclude personnel from this area and do no
permit operation of this system with any cracked, broken or open waveguide.
RF shock/burn .....................
Observe standard RF shock precautions. Do not touch any system antenna (excluding
AN/TPN-18) when energized.
Other................................
Consult the equipment Technical Manual for other operator and/or maintenance hazards.
REFERENCES: TM 11-5895-474-12
Equipment - 130
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |