PRIMARY TASK 1: Load Single Channel Frequencies in SINCGARS RT

TB 11-5821-333-10-2

CONTROLS

ACTION

RESULT*

(1) Obtain proper

(Load CUE freq

freqs from ANCD**

only if directed)***

(2) Set RT controls:

MODE to SC

FCTN to LD

PRESET to MAN,

RT display shows

CUE, or 1-6

[30000](MAN) or

[Fill X] (1-6)

(3) Press:

FREQ

Display shows

[00000/30000]

CLR

Display shows

[_ _ _ _ _]

XXXXX (Freq)

Display shows freq

entered

STO

Display blinks (data

is stored)

(4) Repeat (3)

directed by

above for each freq

NCS or unit SOP)

(5) Set:

Loading of SC freqs

FCTN to SQ ON

is complete

ANCD display is shown as a dark bordered box. RT messages state "Display shows,' without dark border.

In unit using FH net, operators normally load only a MAN frequency on a routine basis. A CUE and SC

frequencies for CHAN 1-6 are loaded only as needed.

***

Only NCS and Alt NCS routinely load a CUE frequency.