SPECIAL INFORMATION.

TB 11-5820-890-12

Repairable item. When beyond lower level repair capability, return to depot. Condemnation and disposal not

authorized below depot level.

Nonrepairable item. When unserviceable condemn and dispose at the level indicated in position 3.

Item requires special handling or condemnation procedures because of specific reasons (i.e., precious

metal content, high dollar value, critical material, or hazardous material).

(1)

National Stock Number. Indicates the National Stock Number (NSN) assigned to the item which is to be used

for requisitioning. When an NSN is used to requisition an item, the item received may have a different part

number from the part ordered.

(2) Part Number. Indicates the number used for identification of items by the manufacturer or

Government agencies. These part numbers control the design and characteristics of the items.

(3)

Commercial and Government Entity (CAGE). Indicates a five-digit numeric code listed in SB 708-42 which

identifies the manufacturer, distributor, or Government agency which as design control of the item.

(4)

Description. Indicates the item name and, if needed, a minimum description to identify the item. The preferred

manufacturer's part number is listed in this column when it differs from the part number listed in Column 4. In

the special tools list (Section III), the initial basis of issue appears as the last line in the entry for each special

tool, TMDE, and support equipment.

(5)

Usable On Codes. Not used.

(6)

Unit of Measure. Indicates the standard of the basic quantity of the listed items as used in performing the

actual maintenance function. This measure is expressed by a two-character alphabetical abbreviation (e.g.,

ea., in., pr., etc.). When the unit of measure differs from the unit of issue, the lowest unit of issue that will

satisfy the required units of measure will be requisitioned.

(7)

Quantity Incorporated in Unit. Not used.

F-4. SPECIAL INFORMATION.

F-4.1 Requisitioning.

Requisitions for items without NSNs should include Exception Data as provided for in Paragraph 3-6, AR 725-

50.

COMSEC material assigned an Accountability Legend Code (ALC) is accountable under AR 380-40 and is to

be requisitioned in accordance with TB 380-41.

For requisitioning of COMSEC items or Controlled Cryptographic Items (CCI), refer to AR 710-2.

Common items (repair parts, subassembly, or other items which are required in support of COMSEC

equipment and are not identified as B56-managed, are to be requisitioned In accordance with the provisions of

AR 725-50.

F-3