Outstation A and Relay C must be in FH Sync and Outstation B and Relay D must be in FH Sync. The
Net ID maybe the same or different. In order to utilize the same Net lD/Frequency, Outstation A and
Relay C, E must be physically separated by 50-75 miles from Relay D, F and Outstation B.
Should there be a requirement to monitor traffic at the retransmit/relay location put COMSEC switch
Once set up, there is no need to change the settings of E & F.
Squelch at 9 o'clock is a starting position and can be moved slightly. Too little and you won't key the
RT and too much you get a constant PTT.