|
| TB 11-5820-890-10-17
4.
Equipment Setup Operation. Assemble and install the SINCGARS radio set and AN/PSC-3 individually per
applicable technical manuals. Perform Preventive Maintenance Checks and Services (PMCS) and/or Buiit-In-
Test (BIT) functions. Load all frequencies, hopsets, and variables into the radio set and establish voice
communications before connecting the AN/PSC-3 to the SINCGARS radio set. Once voice communication
has been established, connect the AN/PSC-3 as described in the following paragraph.
5.
Cable lnstructions. The following figure illustrates the connection between the SINCGARS radio set and the
AN/PSG3 Radio Set.
(See Figure 2)
(See Figure 2)
Figure 1
2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |