Level B.

style E, or PPPB636, type CF, class weather-

ties per destination are less than a pallet load, the

resistant, variety DW. The gross weight of boxes

item packaged as specified in 1 above, shall be

conforming to PPPB640 shall not exceed 250

waterproofed, with tape conforming to PPPT76,

pounds. When the gross weight exceeds 200

in accordance with the taping requirements of the

pounds, or the container length and width is

box specification. A quantity of the waterproofed

48 x 24 inches or more and the weight exceeds

containers shall be packed within a close-fitting

100 pounds, containers will be pallet-mounted on

box conforming to PPPB601, overseas type;

pallets conforming to NNP71, type IV. Closure

PPPB-621, style 4, class 2; or PPP-B-585, style

2 or 3, class 3. When the gross weight exceeds 200

shall be in accordance with the appendix of the

applicable box specification, Reinforcing shall be

pounds, or the container length and width is

pressure-sensitive filament tape banding or non-

48 x 24 inches or more and the weight exceeds

metallic strapping conforming to PPPT97, type

100 pounds, 3 x 4 inch skids, laid flat, shall be ap-

IV and PPPS760, respectively; selection of the

plied in accordance with the requirements of the

material and application shall be in accordance

container specification, or if not specified in the

with the appendix of the applicable box specifica-

specification, in a manner which will adequately

tion.

support the item and facilitate the use of material

handling equipment. Closure and strapping shall

c. Level C.

be in accordance with the applicable container

specification or appendix thereto except that metal

(1) Palletized load. A quantity of radio sets,

strapping shall conform to QQS781, type 1,

packaged as specified in 1 above, shall be palletized

as specified in a. (1) above, except that the fiber-

class B.

board caps shall be class domestic.

b. Level B.

(2) Less than palletized load. When quanti-

(1) Palletized load. A quantity of radio sets,

ties per destination are less than a pallet load, a

packaged as specified in 1 above, shall be palletized

quantity of radio sets, packaged as specified in 1

as specified in a. (1) above.

above, shall be packed as specified in b. (2) above,

(2) Less than palletized load. When quan-

except that the fiberboard boxes shall conform to

tities per destination are less than a pallet load, a

PPPB640 and PPPB636, class 1 and class

quantity of radio sets, packaged as specified in 1

domestic, respectively, and reinforcing shall not

above, shall be packed within a close-fitting fiber-

be required for boxes conforming to PPP-B-636.

board box conforming to PPP-B-640, class 2,