|
| MWO 11-5821-260-30-1Text
Table 1. Radio Set Electrical Test -- Continued
Equipment under test
Test equipment
Step
Performance standard
Test procedure
control settings
control settings
No.
A. Set the radio set
A. None.
Same as step 1.
Same as step 1.
11
function switch to
D/F and squelch
switch to ON. Adjust
am. generator for the
following output
signal applied to
maintenance kit
connector J12:
116.000 MHz
Amplitude:
100 Vrms
Modulation:
1 kHz, 90%
B. Observe the homing
B. The homing on-off indicator
on-off indicator in
indicates all black.
the lower left-hand
corner of main-
tenance kit
HOMING/ADF/
GYRO indicator.
20
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |