EQUIPMENT INTERCONNECTION PROCEDURES

TM 32-5895-206-10

remain loose until the set is moved. Set the counter to 000 by

pressing the RESET button.

2-8 EQUIPMENT INTERCONNECTION PROCEDURES. Be

sure that the recorder/reproducer mode selector switch is in the

OFF position. Be sure that the receiver FUNCTION switches are

set to OFF. Connect the equipment for the type of operation

desired using the guides below.

a. HF Radio Receiving Set AN/TRQ-30(V1). Connect the

equipment as shown in figure 2-10. For df operation, only the df

antenna should be set up. The headset may be connected to the

recorder/reproducer through the extender cord.

b. VHF Radio Receiving Set AN/TRQ-30(V2). Connect the

equipment as shown in figure 2-11. For df operation only the

appropriate df antenna should be set up. The headset may be

connected to the recorder/reproducer through the extender cord.

c. HF/VHF Radio Receiving Set AN/TRQ30(V4). Connect

the equipment as shown in figure 2-12. Only one receiver is

used at a time. For df operation, only the appropriate df antenna

should be set up. The headset may be connected to the

recorder/reproducer through the extender cord.

2-52