Figure 2-6. Typical Radio Intercept Setup Using Longwire Antenna

TM 32-5895-206-10

Figure 2-6. Typical Radio Intercept Setup Using Longwire

(3) Loosen mast retaining screw on tripod assembly.

Insert lower mast assembly into tripod assembly. Do not tighten

mast retaining screw at this time.

(4) Loosen chuck on lower mast section. Insert upper

mast assembly into lower mast assembly. Be sure tapered end

of upper mast assembly aligns properly with lower mast

assembly. Tighten lower mast assembly chuck.

(5) Remove magnetic compass, null meter, and

bracket assembly from antenna carrying case. Install compass

on lower mast assembly using bracket retaining screw.

2-41