c. Set PWR switch (15) to up (on).
d. Using procedures in paragraph 2-6, store assigned receive frequency in channel 1 and transmit frequency in
The higher frequency must be stored in channel 2.
e. Position function selector switch (10) to T2/R1 position.
Press READ switch (14) to verify receive frequency on the frequency display (8).
g. Press READ switch (14) and PTT to verify transmit frequency.
h. Connect satellite antenna to UHF (24) antenna connector.
Set AM/FM switch (11) to FM.
Set XMT PWR switch (21) to HIGH.
k. Set SPKR/MODE switch (4) to PT ON for speaker use or to PT OFF for handset use.
Turn SQ control (6) fully CCW.
m. Turn VOL control (19) CW from fully CCW position until noise is heard in handset (or speaker if on).