Selecting Frequency for Storage

(1) Position SCAN switch (4) to OFF.

(2) Position PWR switch (>) to up (ON) position and verify PWR indicator is on.

CAUTION

The T2/R1 position selects channel 2

when transmitting and channel 1 when

receiving. Do not load frequencies

while in the T2/R1 position.

(3) Position function selector switch (3) to the channel number in which the frequency is to be stored.

(4) Beginning with left-most digit, press and release left-most frequency selector push- button (7) until

desired number is displayed in window above switch (8).

(5) Repeat step 4 for each of the remaining numbers of the selected frequency moving right to the next digit

and switch for each new digit.

(6) Press and release LOAD push-button (2).

2-22