 |
|||
|
|
|||
|
Page Title:
Table 4-16. MODULE TEST SET, JACK PANEL TEST |
|
||
| ||||||||||
|
|  TM 11-5895-1141-34
Table 4-16. MODULE TEST SET, JACK PANEL TEST
Step
Operation
Normal Indication
1
All module test set controls must he preset
according to the procedure in
paragraph 4-10.
2
Using the cables provided, hook up the jack
panel test set.
a. Connect the twin plug cable between the
INSTR jacks on the test set and the HEADSET
jacks on the jack panel.
b. Connect the jack panel cable plug to
socket J10 on the test set.
3
Set the METER SCALE switch to the 0.35 v/
-10 dB position; set the 600 Q DUMMY LOAD
switch to the OUT position; set the CONTR-
INSTR switch to the INSTR position and
adjust the OSCILLATOR LEVEL to 0.18 volt.
This results in -11 dBm input at 50 ohms to
the jack panel.
4
Set the OUTPUT SELECT switch to XMTR AUDIO;
A meter reading the same as in table 4-11,
set the LOCK/NONLOCK switch on the selector
step 5 should be obtained. After taking the
module to the LOCK position. Turn the P/T
meter reading turn the P/T switch to OFF.
KEY switch to ON.
4-46
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals