Earcushion, Damp Cover, and Foam Damper Removal and Replacement (Fig. 3-19)

TM 11-5830-263-20&P

3.9.1.

Earcushion, Damp Cover, and Foam Damper Removal and Replacement (Fig. 3-19)

Figure 3-19. Earcushion, Damp Cover and Foam Damper

a. Removal

NOTE

For ease in removing the earcushion, insert fingers between the foam damper and

earcushion on the side of the earcup where the spring assembly is attached.

1. Remove earcushion (4) from earcup assembly (1) by inserting fingers inside earcup between

damp cover (3) and earcushion (4) and firmly pulling out.

2. Remove damp cover (3) and foam damper (2) after earcushion (4) is removed.

b. Replacement

1. Align foam damper (2) and damp cover (3) and place on earcup assembly (1).

2. While holding foam damper (2) and damp cover (3) in place, align and set earcushion (4) on

earcup assembly (1) and snap in place.