|
| |
TM 11-5821-333-12
6-20. REPAIR OF RT-1476 AND RT-1476A. Continued
REPAIR
1.
2.
3.
REPLACE HOLD UP BATTERY OR HOLD UP
BATTERY COVER.
a. Position RT bottom side up.
b. Loosen screws (2), and remove cover (3).
WARNING
The lithium battery used in your RT is hazard-
ous if misused or tampered with before, dur-
ing, or after discharge.
c.
d.
e.
f.
g.
Remove battery (4).
Replace as required.
Install battery (4).
Install cover (3).
Thread screws (2)
REPLACE KNOBS.
a. Loosen two set
b.
c.
d.
e.
Observe correct polarity.
and tighten.
screws.
Lift knob (5) from shaft.
Replace as required.
Install knob (5) on shaft.
Tighten set screws.
REPLACE FUSE OR FUSE CAP.
a. Remove fuse cap (6).
b. Remove fuse (7).
c. Replace as required.
d. Install fuse (7).
e. Install fuse cap (6).
6-43
|
