Description of Communications Central ANIASC-15A(VX*)

TM 11-5821-285-12-1

1-10. Description of Communications Central

NOTE

Number designations -1, -2, and -3

ANIASC-15A(VX*)

correspond to the station locations.

a. The console consists of console rack assembly

Thus,

FM-1radioreferstothe

RT-

Al, mounting bracket assembly A2, adjuster bracket

823/ARC-131 located in station 1, FM-2

assembly A3, mounting bracket assembly A4, interphone

antenna assembly refers to Antenna AS-

junction box assembly JB-1, radio junction box assembly

1703/AR associated with the FM-2 radio,

JB-2, helicopter installation kit, and associated radio

etc.

equipment, The components of the helicopter installation

c. When the console is installed in an aircraft, the

kit are listed below.

console rack assembly is mounted to the floor with

b. The helicopter installation kit (NSN 5895-00-139-

adapters behind and between the pilot and copilot seat

4895) consists of the following:

(fig. 1-1). The FM-1 and FM-2 antenna assemblies are

(1) Floor adapter assembly.

mounted on each side of the aircraft (fig. 1-2 and 1-3).

(2) FM-1/FM-2 antenna assembly.

The FM-3 antenna assembly is mounted at the rear and

(3) FM-3 antenna assembly.

under the aircraft (fig. 1-4).

(4) UHF antenna assembly.

(5) Cable connector assemblies.

1-5