|
| |
TM 11-5820-890-30-5
14-39. REPLACEMENT OF REAR ACCESS COVER ASSEMBLY. Continued
ITEM
ACTION
REMARKS
INSTALLATION
s.
t.
u.
v.
w.
x.
y.
z.
Rear access cover (2)
and five Iockwashers
Connector (6) o-ring
connector (6),
hex nut, and
Iockwasher
Connector (3) o-ring
Connector (3),
hex nut, and
Iockwasher
Connector (10) o-ring
Connector (10),
hex nut, and
Iockwasher
Connector (13) and
connector retaining
plate (14)
aa. Four screws (12)
Obtain replacement rear access cover
and Iockwashers.
Apply silicone compound to o-ring on
retained J5 connector.
Use 1 1/16 inch socket wrench. Install
and hand tighten retained hex nut and
replacement Iockwasher securing the J5
connector (6) to the rear access cover.
Use torque wrench and 1 1/16 inch
socket. Torque to 70 in-lb.
Apply silicone compound to o-ring on
retained J3 connector.
Use 7/8 inch socket wrench. Install
and hand tighten retained hex nut and
replacement Iockwasher securing the J3
connector (3) to the rear access cover.
Use torque wrench and 7/8 inch socket.
Torque to 60 in-lb.
Apply silicone compound to o-ring
on retained J4 connector.
Use 7/8 inch socket wrench. Install
and hand tighten retained hex nut and
replacement Iockwasher securing the J4
connector (10) to the rear access cover.
Use torque wrench and 7/8 inch socket.
Torque to 60 in-lb.
Position retained connector and connector
retaining plate in rear access cover.
Apply sealing compound to threads of
four retained screws. Use flat tip screwdriver.
Install and hand tighten four screws securing
the connector and connector retaining plate
to the rear access cover. Use torque
screwdriver. Torque to 90 in-lb.
14-62
|
