|
| |
TM 11-5820-890-30-5
14-39. REPLACEMENT OF REAR ACCESS COVER ASSEMBLY. Continued
ITEM
ACTION
REMARKS
REMOVAL Continued
k.
l.
m.
n.
o.
p.
q.
r.
Connector (13) and
connector retaining
plate (11)
Connector (3), hex nut,
and Iockwasher
Connector (3)
Connector (10), hex nut,
and Iockwasher
Connector (10)
Connector (6), hex nut,
and Iockwasher
Connector (6)
Rear access cover (2)
Remove from rear access cover and
inspect for damage. If damaged, obtain
replacement.
Use 7/8 inch socket wrench. Remove and
inspect hex nut securing J3 connector (3)
to rear access cover. If damaged, obtain
replacement. Discard Iockwasher.
Remove and retain.
Use 7/8 inch socket wrench. Remove and
inspect hex nut securing J4 connector (10)
to rear access cover. If damaged, obtain
replacement. Discard Iockwasher.
Remove and retain.
Use 1 1/16 inch socket wrench. Remove
and inspect hex nut securing J5 connector
(6) to rear access cover. If damaged,
obtain replacement. Discard Iockwasher.
Remove and retain.
Remove damaged rear access cover from
power supply adapter chassis and send it
to supply for disposition.
Figure 14-7. Rear Access Cover Assembly on Power Supply Adapter.
14-61
|
