|
| |
TM 11-5820-890-30-5
8-11. VISUAL INSPECTION OF BATTERY BOX.
Before beginning any maintenance procedure, inspect the battery box for physical damage. Use the following
table as a guide to inspect the components. Look for damaged or missing parts, and replace them as required.
An exploded view of the Battery Box CY-8523A/PRC components is provided in figure 8-3.
ITEM
ACTION
REMARKS
a. Battery box case (15)
b. Battery box cover (1)
c. Six latch/strike assemblies
(14, 18, 23, 24, and 32)
d. J1 connector (34)
e. P1 connector (6)
f. E1 and E2 binding
posts (28)
g. Two seal screws
h. Dampening tape
gasket (3)
i.
Wires
j.
Plastic strip (10)
(16)
k. Two-wire transient
protection CCA (26)
l.
Access cover (27)
Check for obvious damage.
Check for obvious damage.
Check for obvious damage.
Check for bent/broken pins and tight
connection to battery box case.
Check for bent/broken pins and tight
connection to battery box case.
Check for
Check for
Check for
Check for
obvious damage.
a tight seal to battery box case.
obvious damage.
frays, faulty connections, and
other obvious damage.
Check for obvious damage.
Check for burnt components, missing
traces, and other obvious damage.
Check for obvious damage.
If defective, proceed to
paragraph 8-24.
If defective, proceed to
paragraph 8-12.
If defective, proceed to
paragraph 8-13.
If defective, proceed to
paragraph 8-18.
If defective, proceed to
paragraph 8-19.
If defective, proceed to
paragraph 8-17.
If defective, proceed to
paragraph 8-20.
If defective, proceed to
paragraph 8-21.
If defective, proceed to
paragraph 8-22.
If defective, proceed to
paragraph 8-23.
If defective, proceed to
paragraph 8-15.
If defective, proceed to
paragraph 8-16.
8-7
|
