|
| |
TM 11-5820-890-30-5
2-53. REPLACEMENT OF FRONT PANEL. Continued
ITEM
ACTION
REMARKS
REMOVAL Continued
g. Window frame
h. Shielding gasket
i.
Observation window
j.
Window gasket
k. Identification plate and
two screws
l.
Front panel
INSTALLATION
m.
n.
o.
p.
q.
r.
s.
t.
u.
v.
w.
x.
Identification plate and
front panel
Identification plate
Window gasket
Observation window
Shielding gasket
Window frame
Window frame
Six standoff posts
Display CCA and
insulator plate
Keypad
Audio flex
Switch flex
y .
Front panel
assembly
Use cross tip screwdriver. Remove six
screws securing window frame to front
panel. remove and retain window frame.
Remove and discard.
Remove and retain.
Remove and discard.
Use cross tip screwdriver. Remove and
retain.
Discard.
Position retained identification plate on
replacement front panel.
Use cross tip screwdriver. Install two
retained screws securing identification
plate to front panel.
Position replacement window gasket on
front panel.
Position retained observation window on
window gasket.
Position replacement shielding gasket on
observation window.
Install retained window frame.
Use cross tip screwdriver. Install six
retained screws securing window frame.
Use flat tip screwdriver. Install six retained
standoff posts.
Install.
Install.
Install.
Install.
Install.
This was removed in
step k.
These were removed in
step k.
This was removed in
step i.
This was removed in
step g.
These were removed in
step g.
These were removed in
step f.
Refer to paragraph 2-50 for
installation of display CCA.
Refer to paragraph 2-47 for
installation of data entry
keypad.
Refer to paragraph 2-51 for
installation of audio flex.
Refer to paragraph 2-52 for
installation of switch flex.
Refer to paragraph 2-49 for
installation of front panel
assembly.
2-187
|
