Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: REPLACEMENT OF RT FRONT PANEL. Continued
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 



TM 11-5820-890-30-5 2-49.  REPLACEMENT  OF  RT  FRONT  PANEL.  Continued ITEM ACTION REMARKS REMOVAL Continued k.  Switch  flex l. Display flex m.  Audio  flex n.  RT  front  panel  assembly INSTALLATION o.  RT  front  panel  assembly p.  Audio  flex q.   Display   flex r.   Switch   flex s.  RT  front  panel  assembly Use  flat  tip  screwdriver.  Loosen  two  jack- screws  securing  switch  flex  connector  to RT  chassis.  Disconnect  switch  flex  con- nector  from  RT  chassis. Use  flat  tip  screwdriver.  Loosen  two  jack- screws  securing  display  flex  connector  to RT  chassis.  Disconnect  display  flex  con- nector  from  RT  chassis. Use  flat  tip  screwdriver.  Loosen  two  jack- screws  securing  audio  flex  connector  to RT  chassis.  Disconnect  audio  flex  con- nector  from  RT  chassis. Carefully  remove  from  RT  chassis.  Repair RT  front  panel  assembly  as  needed: R/R display CCA R/R  audio  flex  assembly R/R  switch  flex  assembly R/R front panel R/R observation window Position  RT  front  panel  face  down  near front  of  RT  chassis. Use  flat  tip  screwdriver.  Install  audio flex  by  tightening  two  jackscrews.  Do not  place  any  torque  on  jackscrews after  connectors  are  mated. Use  flat  tip  screwdriver.  Install  display flex  by  tightening  two  jackscrews.  Do not  place  any  torque  on  jackscrews after   connectors   are   mated. Use  flat  tip  screwdriver.  Install  switch flex  by  tightening  two  jackscrews.  Do not  place  any  torque  on  jackscrews after  connectors  are  mated. Position  RT  front  panel  on  front  of  RT chassis. t.                  Nine  captive Use  torque  screwdriver.  Tighten  nine screws captive  screws  securing  RT  front  panel assembly  to  RT  chassis.  Torque  screws to  8  to  10  in-lb. u.   Guard   assembly Position  on  front  of  RT  chassis. Loosen  jackscrews  by  al- ternately  turning  each  no more  than  1-1/2  turns. Loosen  jackscrews  by  al- ternately  turning  each  no more  than  1-1/2  turns. Loosen  jackscrews  by  al- ternately  turning  each  no more  than  1-1/2  turns. Alternately  turn  each  jack- screw  no  more  than  1-1/2 turns. Alternately  turn  each  jack- screw  no  more  than  1-1/2 turns. Alternately  turn  each  jack- screw  no  more  than  1-1/2 turns. 2-178


Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business