|
| |
TM 11-5820-890-30-5
2-41. REPLACEMENT OF lF/DEMODULATOR (1A8).
Tools:
Flat tip screwdriver
Module extractor
Round nose pliers
Torque screwdriver
References:
Paragraph 2-34 for use of module extractor.
Paragraph 2-35 for removal and installation of RT covers.
Figure 2-15 for module location.
Figure 2-17 for location of RF cables.
ITEM
ACTION
REMARKS
REMOVAL
a. RT bottom cover
Remove.
Refer to paragraph 2-35 for
removal of bottom cover.
b. RF cable (1W4)
Use round nose pliers. Disconnect from
See figure 2-17 for cable
lF/demodulator.
location.
c. RT top cover
Remove.
Refer to paragraph 2-35 for
removal of top cover.
d. lF/demodulator
Use module extractor. Remove from RT.
Refer to paragraph 2-34 for
use of module extractor.
See figure 2-15 for module
location.
INSTALLATION
e. lF/demodulator
Check connector location and place in
card guides. Press down to fully seat
connector.
f. RF cable (1W4)
Use round nose pliers. Connect to
See figure 2-17 for cable
lF/demodulator.
location.
g. RT bottom cover
Install.
Refer to paragraph 2-35
for installation of bottom
cover.
h. RT top cover
Install.
Refer to paragraph 2-35 for
installation of top cover.
2-166
|
