|
| |
TM 11-5820-890-30-5
2-39. REPLACEMENT OF ECCM MODULE (1A5). Continued
ITEM
ACTION
REMARKS
INSTALLATION
CAUTION
d. ECCM module
Check connector location and place in
Carefully aline ECCM mod-
card guide. Press down until ECCM mod-
ule with control module to
ule connector touches control module
avoid connector damage.
connector. Carefully aline ECCM module
with control module. Press down to fully
seat both connectors.
e. RT top cover
Install.
Refer to paragraph 2-35 for
installation of top cover.
2-40. REPLACEMENT OF CONTROL MODULE (1A4).
Tools:
Flat tip screwdriver
Module extractor
Torque screwdriver
References:
Paragraph 2-34 for use of module extractor.
Paragraph 2-35 for removal and installation of RT top cover.
Paragraph 2-39 for removal and installation of ECCM module.
ITEM
ACTION
REMARKS
REMOVAL
a. RT top cover
Remove.
Refer to paragraph 2-35 for
removal of top cover.
b. ECCM module
Remove.
Refer to paragraph 2-39 for
removal of ECCM module.
c. Control module
Use module extractor. Remove from RT.
Refer to paragraph 2-34 for
use of module extractor.
INSTALLATION
d. Control module
Check connector location and place in
card guide. Press down to fully seat
connector.
e. ECCM module
f. RT top cover
Install.
Install.
Refer to paragraph 2-39
for installation of ECCM
module.
Refer to paragraph 2-35 for
installation of top cover.
2-165
|
