OPERATOR CONTROLS

TM 11-5820-890-10-8

5.3.

OPERATOR CONTROLS

5.3a.

SINCGARS Receiver-Transmitter (RT) Controls

GENERAL

The SINCGARS radio has seven controls, plus the RT keypad and

display, for the operator to use. Several of these controls are used

infrequently, but they are available when required. Each control is

described below. See RT front panel graphic for the location of each.*

Figure 5-1. SINCGARS RT FRONT PANEL

Some control positions found on the RT front panel are enclosed in a box. To move the

control into or out of these positions, the operator must pull out on the control knob. These

controls are spring loaded and will return to normal position when released.

5-5