Connectors, ASIP RT

TM 11-5820-890-10-8

2.2e.

Connectors, ASIP RT

P1 (System)

This connector provides RT power and signaling interfaces

Figure 2-10. ASIP RT Connectors

J6 (Auxiliary)

Used to connect HRCRD handset and two-wire adapter.

J5 (GPS)

Enables a PLGR to be connected to a manpack radio.

The J4 (AUD/DATA) connector supports general data communications at

J3 (AUD/DATA)

SINCGARS Data Rates of 600, 1200, 2400, 4800 and 16,000 BPS and

Enhanced Data Rates of 1200N, 2400N, 4800N, and 9600N BPS. The

RS-232 interface allows transmission of data via SINCGARS ASIP radios

using computers and commercial " modem" software. If not using Packet

(PCKT) data mode, or the internet controller (INC) feature of the ASIP radio,

all data devices must be connected to the AUD/DATA port, not to the ASIP

VAA.

J2 (AUD/FILL)

Handsets used with the ASIP RT may be connected to the AUD/DATA or

AUD/FILL connector. (NOTE: Handsets will not function if connected to the

front of the ASIP VAA.)

J1 (Antenna)

RF Input/Output.

2-11