Quantcast Table 4-3. Checkout/Troubleshoot the Antenna Coupler CU-2229/URC -92--Continued - TM-11-5820-873-340079

 

Click here to make tpub.com your Home Page

Page Title: Table 4-3. Checkout/Troubleshoot the Antenna Coupler CU-2229/URC -92--Continued
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Table 4-3. Checkout/Troubleshoot the Antenna Coupler CU-2229/URC -92--Continued - TM-11-5820-873-340078
Up
TM-11-5820-873-34 Radio Set AN/URC-92 (NSN
Next
Section IV. MAINTENANCE - TM-11-5820-873-340080


TM 11-5820-873-34
Table 4-3 Checkout/Troubleshoot the Antenna Coupler CU-2229/URC- 92-Continued
STEP
ACTION
INDICATION
NEXT STEP
124
Check relay 2K4 coil and contacts for proper
Relay checks good
Yes: step 139
operation.
No: replace relay 2K4
125
Check resistor 2R9.
Resistor checks good
Yes: step 139
No: replace resistor 2R9
126
Check components 2A3AC6, 2A3AL6 and
Components check good
Yes: step 139
2A3AC19.
No: replace faulty
component
127
Check bistable relay 2A5K1 coil and contacts for
Bistable relay checks good
Yes: step 139
proper operation.
No: replace bistable
relay 2A5K1.
128
Check bistable relay 2A5K2 coil and contacts for
Bistable relay checks good
Yes: step 139
proper operation.
No: replace bistable
relay 2A5K2
129
Check Amplitude Detector Adjustment.
Amplitude Detector Is within tolerance
Yes: step 130
No: step 135
130
Check Phase Detector Adjustment.
Phase Detector adjusts to within tolerance
Yes: step 131
No: step 136
131
Set mode switch to OFF Remove Control Logic
Meter indicates 10 ohms or less
Yes: step 132
CCA 2A1 Disconnect control cable at Antenna
No: step 137
Coupler Connect multimeter between 2P1-P and
2XA1-8.
132
Connect multimeter between 2XA1-8 and
Meter indicates 1000 ohms or more
Yes: step 133
ground.
No: step 137
133
Connect multimeter between 2P1-g and
Meter indicates 1000 ohms or more
Yes step 134
2XA1-9.
No: step 138
134
Connect multimeter between 2XA1-9 and
Meter indicates 1000 ohms or more
Yes. step 136
ground
No: step 138
135
Perform Amplitude Detector Adjustment
Amplitude Detector adjusts to within tolerance
Yes: step 6a
No: step 139
136
Perform Phase Detector Adjustment
Phase detector adjusts to within tolerance
Yes step 6a
No: step 139
137
Check components 243AC6, 2A3AL6 and
Components check good
Yes: reinstall re
2A3AC19 for opens, shorts and shorts to ground
moved com-
ponents; go to
step 139
No: reinstall removed
components;
replace faulty
component.
138
Check components 2A3AC2, 2A3AL2 and
Components check good
Yes: reinstall re-
2A3AC23 for opens, shorts and shorts to ground
moved com-
ponents; go to
step 139
No: reinstall removed
components;
replace faulty
component.
139
Repair and/or replace wiring and connectors as
---
necessary
140
Replace and/or repair Control Logic CCA 2A1.
---
Use conventional troubleshooting methods for
CCA repair
141
Replace and/or repair Phase and Amplitude CCA
---
2A2. Use conventional troubleshooting methods
for CCA repair
142
Replace and/or repair Servo Control Assy 2A6
---
Use conventional troubleshooting methods for re-
pair
143
Replace and/or repair Phase and Amplitude Assy
---
2A4. Perform Amplitude Detector Adjustment
and Phase Detector Adjustment Use conven-
tional troubleshooting methods for repair
144
Replace and/or repair Regulator CCA 2A3. Use
---
conventional troubleshooting methods for repair
4-31


Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business