Route left-side loudspeaker cable

TB 9-2320-280-35-6

NOTE

SINCGARS model AN/VRC-92F shown.

13-2. Route left-side loudspeaker cable (8) down through center access hole (2), under integrated rack (3),

and under left-side tunnel insulation (10) towards left loudspeaker (9). Connect left-side

loudspeaker cable (8) to left loudspeaker (9).

13-3. Secure left-side loudspeaker cable (8) to integrated rack (3) with loop clamp (13) and existing

screw (15), washer (14), lockwasher (12), and nut (11). Do not tighten nut (11) at this time. Coil

excess left-side loudspeaker cable (8) and store under integrated rack (3).

13-4. Route antenna cable (6) from left side of mounting base (7), down through center access hole (2),

under integrated rack (3), and under right-side tunnel insulation (4) towards rear of vehicle.

6. ANTENNA CABLE A3014031-8 QTY. 1

8. LOUDSPEAKER CABLE A3014038-3 QTY. 1

13. LOOP CLAMP MS21333-121 QTY. 1

Figure 5-35.

5-26